[ABAP] Mehrere interne Tabellen in eigenem Fullscreen-Fenster (cl_gui_dialogbox_container) anzeigen

CLASS lcl_show_window DEFINITION FINAL.

  PUBLIC SECTION.

    CLASS-METHODS show
      IMPORTING
        !i_title TYPE string
      CHANGING
        !c_itab  TYPE STANDARD TABLE .

    CLASS-METHODS show2
      IMPORTING
        !i_title1 TYPE string
        !i_title2 TYPE string
      CHANGING
        !c_itab1  TYPE STANDARD TABLE
        !c_itab2  TYPE STANDARD TABLE .

  PROTECTED SECTION.

  PRIVATE SECTION.

    CLASS-METHODS on_close
      FOR EVENT close OF cl_gui_dialogbox_container
      IMPORTING
        !sender .
ENDCLASS.

CLASS lcl_show_window IMPLEMENTATION.

  METHOD on_close.
    IF sender IS NOT INITIAL.
      sender->free( ).
    ENDIF.
  ENDMETHOD.

  METHOD show.

    TRY.
* Window-Style hier ohne cl_gui_control=>ws_thickframe vordefinieren, da sonst das Fenster nicht richtig maximized werden kann
        DATA(i_style) = cl_gui_control=>ws_minimizebox + cl_gui_control=>ws_maximizebox + cl_gui_control=>ws_sysmenu.

* Bildschirmauflösung ermitteln
        DATA(lv_metric_factors) = cl_gui_props_consumer=>create_consumer( )->get_metric_factors( ).

* https://download.consolut.com/direct/SAP_PrintDoku/de/BCCIDOCK/BCCIDOCK.PDF
* Top, Left, Width, Height in Pixel
        DATA(o_cnt) = NEW cl_gui_dialogbox_container( no_autodef_progid_dynnr = abap_true
                                                      caption                 = |{ i_title }|
                                                      top                     = 1
                                                      left                    = 1
                                                      width                   = lv_metric_factors-screen-x
                                                      height                  = lv_metric_factors-screen-y
                                                      style                   = i_style
                                                      metric                  = cl_gui_dialogbox_container=>metric_pixel ).

* Dialogbox-Container fullscreen (maximized) setzen
*        o_cnt->set_alignment( cl_gui_control=>align_at_left + cl_gui_control=>align_at_right + cl_gui_control=>align_at_top + cl_gui_control=>align_at_bottom ).

* OnClose-Handler für cl_gui_dialogbox_container
        SET HANDLER on_close FOR o_cnt.

* SALV-Grid
        DATA: o_salv TYPE REF TO cl_salv_table.

        cl_salv_table=>factory( EXPORTING r_container  = o_cnt
                                IMPORTING r_salv_table = o_salv
                                CHANGING  t_table      = c_itab ).

        o_salv->get_functions( )->set_all( abap_true ).
        o_salv->get_columns( )->set_optimize( abap_true ).
        o_salv->get_display_settings( )->set_list_header( |{ i_title }| ).
        o_salv->get_display_settings( )->set_striped_pattern( abap_true ).
        o_salv->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).

        o_salv->display( ).

      CATCH cx_root.
    ENDTRY.
  ENDMETHOD.

  METHOD show2.

    TRY.
* Window-Style hier ohne cl_gui_control=>ws_thickframe vordefinieren, da sonst das Fenster nicht richtig maximized werden kann
        DATA(i_style) = cl_gui_control=>ws_minimizebox + cl_gui_control=>ws_maximizebox + cl_gui_control=>ws_sysmenu.

* Bildschirmauflösung ermitteln
        DATA(lv_metric_factors) = cl_gui_props_consumer=>create_consumer( )->get_metric_factors( ).

* https://download.consolut.com/direct/SAP_PrintDoku/de/BCCIDOCK/BCCIDOCK.PDF
* Top, Left, Width, Height in Pixel
        DATA(o_cnt) = NEW cl_gui_dialogbox_container( no_autodef_progid_dynnr = abap_true
                                                      caption                 = |{ i_title1 }, { i_title2 }|
                                                      top                     = 1
                                                      left                    = 1
                                                      width                   = lv_metric_factors-screen-x
                                                      height                  = lv_metric_factors-screen-y
                                                      style                   = i_style
                                                      metric                  = cl_gui_dialogbox_container=>metric_pixel ).

* Dialogbox-Container fullscreen (maximized) setzen
*        o_cnt->set_alignment( cl_gui_control=>align_at_left + cl_gui_control=>align_at_right + cl_gui_control=>align_at_top + cl_gui_control=>align_at_bottom ).

* OnClose-Handler für cl_gui_dialogbox_container
        SET HANDLER on_close FOR o_cnt.

* Referenzen auf GUI-Objekte
* Splitter
        DATA: o_splitter TYPE REF TO cl_gui_splitter_container.

* horizontaler Splitter in cl_gui_dialogbox_container einbetten
        o_splitter = NEW #( parent                  = o_cnt
                            no_autodef_progid_dynnr = abap_true
                            rows                    = 2
                            columns                 = 1 ).

* Splittercontainer auf 50%
        o_splitter->set_row_height( id = 1 height = 50 ).

* Splittercontainer oben/unten holen
        DATA(o_cnt_s1) = o_splitter->get_container( row = 1 column = 1 ).
        DATA(o_cnt_s2) = o_splitter->get_container( row = 2 column = 1 ).

* SALV-Grid 1 in Splittercontainer oben
        DATA: o_salv1 TYPE REF TO cl_salv_table.

        cl_salv_table=>factory( EXPORTING r_container  = o_cnt_s1
                                IMPORTING r_salv_table = o_salv1
                                CHANGING  t_table      = c_itab1 ).

        o_salv1->get_functions( )->set_all( abap_true ).
        o_salv1->get_columns( )->set_optimize( abap_true ).
        o_salv1->get_display_settings( )->set_list_header( |{ i_title1 }| ).
        o_salv1->get_display_settings( )->set_striped_pattern( abap_true ).
        o_salv1->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).

        o_salv1->display( ).

* SALV-Grid 2 in Splittercontainer unten
        DATA: o_salv2 TYPE REF TO cl_salv_table.

        cl_salv_table=>factory( EXPORTING r_container  = o_cnt_s2
                                IMPORTING r_salv_table = o_salv2
                                CHANGING  t_table      = c_itab2 ).

        o_salv2->get_functions( )->set_all( abap_true ).
        o_salv2->get_columns( )->set_optimize( abap_true ).
        o_salv2->get_display_settings( )->set_list_header( |{ i_title2 }| ).
        o_salv2->get_display_settings( )->set_striped_pattern( abap_true ).

        o_salv2->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).

        o_salv2->display( ).
      CATCH cx_root.
    ENDTRY.
  ENDMETHOD.
ENDCLASS.

START-OF-SELECTION.

* Beispieldaten
  SELECT
    FROM mara
    FIELDS *
    INTO TABLE @DATA(it_mara)
    UP TO 100 ROWS.

  IF sy-subrc = 0.
    SELECT
      FROM marc
      FIELDS *
      INTO TABLE @DATA(it_marc)
      UP TO 100 ROWS.

    IF sy-subrc = 0.
* interne Tabelle im Window anzeigen
      lcl_show_window=>show( EXPORTING i_title = |MARA|
                             CHANGING  c_itab  = it_mara ).

* zwei interne Tabellen in einem Window mit Splitter anzeigen
      lcl_show_window=>show2( EXPORTING i_title1 = |MARA|
                                        i_title2 = |MARC|
                              CHANGING  c_itab1  = it_mara
                                        c_itab2  = it_marc ).
    ENDIF.
  ENDIF.

* cl_gui_container=>default_screen erzwingen
  WRITE: space.

[ABAP] Zwei SALV-Grids in einem Splittercontainer anzeigen

* Daten für SALV-Grid oben
SELECT *
  INTO TABLE @DATA(it_scarr)
  FROM scarr.

* Daten für SALV-Grid unten
SELECT *
  INTO TABLE @DATA(it_sflight)
  FROM sflight.

* Referenzen auf GUI-Objekte
* Splitter
DATA: o_splitter_main TYPE REF TO cl_gui_splitter_container.
* Splitter-Container oben
DATA: o_container_o   TYPE REF TO cl_gui_container.
* Splitter-Container unten
DATA: o_container_u   TYPE REF TO cl_gui_container.

* Splitter auf default_screen erzeugen
o_splitter_main = NEW #( parent                  = cl_gui_container=>default_screen
                         no_autodef_progid_dynnr = abap_true       " wichtig
                         rows                    = 2
                         columns                 = 1 ).

* Höhe oberer Splitter in %
o_splitter_main->set_row_height( id = 1 height = 40 ).

* REF auf oberen und unteren Splitcontainer holen
o_container_o = o_splitter_main->get_container( row = 1 column = 1 ).
o_container_u = o_splitter_main->get_container( row = 2 column = 1 ).

* SALV-Table oben mit Fluggesellschaften
DATA: o_salv_o TYPE REF TO cl_salv_table.

cl_salv_table=>factory( EXPORTING
                          r_container  = o_container_o
                        IMPORTING
                          r_salv_table = o_salv_o
                        CHANGING
                          t_table      = it_scarr ).

* Grundeinstellungen
o_salv_o->get_functions( )->set_all( abap_true ).
o_salv_o->get_columns( )->set_optimize( abap_true ).
o_salv_o->get_display_settings( )->set_list_header( 'Fluggesellschaften' ).
o_salv_o->get_display_settings( )->set_striped_pattern( abap_true ).
o_salv_o->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).

* Spaltenüberschriften: technischer Name und Beschreibungstexte
LOOP AT o_salv_o->get_columns( )->get( ) ASSIGNING FIELD-SYMBOL(<so>).
  DATA(o_col_o) = <so>-r_column.
  o_col_o->set_short_text( || ).
  o_col_o->set_medium_text( || ).
  o_col_o->set_long_text( |{ o_col_o->get_columnname( ) }| ).
ENDLOOP.

* SALV-Grid anzeigen
o_salv_o->display( ).

* SALV-Table unten mit Flügen
DATA: o_salv_u TYPE REF TO cl_salv_table.

cl_salv_table=>factory( EXPORTING
                          r_container  = o_container_u
                        IMPORTING
                          r_salv_table = o_salv_u
                        CHANGING
                          t_table      = it_sflight ).

* Grundeinstellungen
o_salv_u->get_functions( )->set_all( abap_true ).
o_salv_u->get_columns( )->set_optimize( abap_true ).
o_salv_u->get_display_settings( )->set_list_header( 'Flüge' ).
o_salv_u->get_display_settings( )->set_striped_pattern( abap_true ).
o_salv_u->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).

* Spaltenüberschriften: technischer Name und Beschreibungstexte
LOOP AT o_salv_u->get_columns( )->get( ) ASSIGNING FIELD-SYMBOL(<su>).
  DATA(o_col_u) = <su>-r_column.
  o_col_u->set_short_text( || ).
  o_col_u->set_medium_text( || ).
  o_col_u->set_long_text( |{ o_col_u->get_columnname( ) }| ).
ENDLOOP.

* SALV-Grid anzeigen
o_salv_u->display( ).

* leere Toolbar ausblenden
cl_abap_list_layout=>suppress_toolbar( ).

* Erzwingen von cl_gui_container=>default_screen
WRITE: space.

[ABAP] Klasse zur Darstellung von Nachrichtentexten in einem SALV-Grid in einem Popup-Dialog

CLASS lcl_popup_msg_box DEFINITION.

  PUBLIC SECTION.
* Typ Textzeile
    TYPES: BEGIN OF ty_textline,
             idx  TYPE rspos,
             text TYPE bapi_msg,
           END OF ty_textline.

    TYPES: ty_it_messagetab TYPE STANDARD TABLE OF ty_textline WITH DEFAULT KEY.

* Typ Button-Event
    TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.

* Anzeige des Popups
    CLASS-METHODS show
      IMPORTING
                i_window_title   TYPE string
                i_window_top     TYPE i
                i_window_left    TYPE i
                i_window_width   TYPE i
                i_window_height  TYPE i
                i_show_functions TYPE boolean
                i_it_messages    TYPE ty_it_messagetab
      RETURNING VALUE(rv_ok)     TYPE boolean.

  PRIVATE SECTION.

* Button Funktionskonstanten
    CONSTANTS: co_btn_ok TYPE ui_func VALUE 'BTN_OK'.
    CONSTANTS: co_btn_cancel TYPE ui_func VALUE 'BTN_CANCEL'.

* Message-Tabelle
    CLASS-DATA: it_messages TYPE ty_it_messagetab.

* GUI-Objekte
    CLASS-DATA: o_cnt TYPE REF TO cl_gui_dialogbox_container.
    CLASS-DATA: o_salv TYPE REF TO cl_salv_table.
    CLASS-DATA: o_split TYPE REF TO cl_gui_splitter_container.
    CLASS-DATA: o_tool TYPE REF TO cl_gui_toolbar.
    CLASS-DATA: gv_retval TYPE boolean VALUE abap_false.

* on_close-Handler
    CLASS-METHODS:
      on_close FOR EVENT close OF cl_gui_dialogbox_container
        IMPORTING
            sender.
* on_function_selected Handler
    CLASS-METHODS:
      on_function_selected FOR EVENT function_selected OF cl_gui_toolbar
        IMPORTING
            fcode
            sender.

ENDCLASS.

CLASS lcl_popup_msg_box IMPLEMENTATION.

  METHOD show.

    it_messages = i_it_messages.

* Container für GUI-Elemente
    o_cnt = NEW #( parent = cl_gui_container=>default_screen
                   caption = |{ i_window_title }|
                   top = i_window_top
                   left = i_window_left
                   width = i_window_width
                   height = i_window_height
                   no_autodef_progid_dynnr = abap_true
                 ).

* on_close-Handler setzen
    SET HANDLER on_close FOR o_cnt.

* Splitter für Grid und Toolbar
    o_split = NEW #( parent = o_cnt
                     no_autodef_progid_dynnr = abap_true
                     rows = 2
                     columns = 1 ).

* Unteren Splitterbereich setzen
    o_split->set_row_sash( id    = 2
                           type  = cl_gui_splitter_container=>type_movable
                           value = cl_gui_splitter_container=>false ).

    o_split->set_row_sash( id    = 2
                           type  = cl_gui_splitter_container=>type_sashvisible
                           value = cl_gui_splitter_container=>false ).

    o_split->set_row_height( id = 2 height = 8 ).

* Oberen und unteren Splittercontainer holen
    DATA(o_container_top)    = o_split->get_container( row = 1 column = 1 ).
    DATA(o_container_bottom) = o_split->get_container( row = 2 column = 1 ).
* Toolbar für Buttons erzeugen
    DATA(o_tool) = NEW cl_gui_toolbar( parent       = o_container_bottom
                                       display_mode = cl_gui_toolbar=>m_mode_horizontal
                                       align_right  = 1 ).

* Toolbarevents
    DATA(it_events) = VALUE ty_it_events( ( eventid    = cl_gui_toolbar=>m_id_function_selected
                                            appl_event = abap_true ) ).

    o_tool->set_registered_events( events = it_events ).

* Buttons + Separator einfügen
    o_tool->add_button( fcode       = co_btn_ok
                        icon        = icon_okay
                        butn_type   = cntb_btype_button
                        text        = 'Ok'
                        quickinfo   = 'Ok'
                        is_checked  = abap_false
                        is_disabled = abap_false ).

    o_tool->add_button( fcode       = ''
                        icon        = ''
                        butn_type   = cntb_btype_sep
                        text        = ''
                        quickinfo   = ''
                        is_checked  = abap_false
                        is_disabled = abap_false ).

    o_tool->add_button( fcode       = co_btn_cancel
                        icon        = icon_cancel
                        butn_type   = cntb_btype_button
                        text        = 'Abbruch'
                        quickinfo   = 'Abbruch'
                        is_checked  = abap_false
                        is_disabled = abap_false ).

* on_function_selected-Handler
    SET HANDLER on_function_selected FOR o_tool.

* SALV-Grid im oberen Splitter einfügen
    cl_salv_table=>factory( EXPORTING
                              r_container  = o_container_top
                            IMPORTING
                              r_salv_table = o_salv
                            CHANGING
                              t_table      = it_messages ).

* Eigenschaften SALV-Grid
    o_salv->get_columns( )->set_optimize( abap_true ).
    o_salv->get_display_settings( )->set_striped_pattern( abap_true ).
    IF i_show_functions = abap_true.
      o_salv->get_functions( )->set_all( ).
    ENDIF.
    o_salv->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).
    o_salv->display( ).

* Dummy-Screen aufrufen und somit cl_gui_container=>default_screen erzeugen -> Trägerdynpro für cl_gui_dialogbox_container
    CALL SCREEN 100.

* nach Buttonclick noch die Ergebnisrückgabe
    rv_ok = gv_retval.
  ENDMETHOD.

  METHOD on_close.

* cl_gui_dialogbox_container bei Klick auf Schließen-Kreuz schließen
    IF sender IS NOT INITIAL.
      sender->free( ).
    ENDIF.

* Zum aufrufenden Dynpro zurück
    LEAVE TO SCREEN 0.

  ENDMETHOD.

* Button ermitteln -> Reaktion -> Setzen des Rückgabewertes beim Schließen des Popups
  METHOD on_function_selected.
    CASE fcode.
      WHEN co_btn_ok.
        gv_retval = abap_true.
      WHEN co_btn_cancel.
        gv_retval = abap_false.
    ENDCASE.

* Popup-Fenster schließen
    on_close( o_cnt ).
  ENDMETHOD.
ENDCLASS.

* Dummy-Screen für cl_gui_container=>default_screen deklarieren
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECTION-SCREEN END OF SCREEN 100.

START-OF-SELECTION.

* Nachrichtentabelle erzeugen
  DATA(it_msg) = VALUE lcl_popup_msg_box=>ty_it_messagetab( ( idx = 1 text = 'Nachricht 1' )
                                                            ( idx = 2 text = 'Nachricht 2' )
                                                          ).

* Popup mit Nachrichten anzeigen
  IF abap_true = lcl_popup_msg_box=>show( EXPORTING
                                            i_window_title   = 'Meldungen'
                                            i_window_top     = 100
                                            i_window_left    = 100
                                            i_window_width   = 240
                                            i_window_height  = 240
                                            i_show_functions = abap_false
                                            i_it_messages    = it_msg ).
    WRITE: / 'OK.'.
  ELSE.
    WRITE: / 'Abbruch.'.
  ENDIF.

[ABAP] Charts mit cl_gui_chart_engine / cl_gui_chart_engine_win anzeigen, ändern, laden und speichern (XML), Beispiel-Charts

Einleitung

Mit Hilfe der Klasse cl_gui_chart_engine können Charts generiert werden. Über XML-Dokumente kann die Anzeige konfiguriert bzw. Daten angezeigt werden. SAP liefert zur einfachen Konfiguration ein Tool namens Chart Designer. Die XML-Daten können aber auch manuell generiert werden, eine genaue Beschreibung findet man im Dokument „XML Format.pdf“ des Chart Designers.
Mit Hilfe des unten stehenden Demo-Programms können auch XML-Daten für das Customizing generiert, geladen und gespeichert sowie Plot-Daten im XML-Format eingeladen werden. Es sind auch zwei einfache Beispiele für einen Bar-Chart sowie einen Scatter-Plot implementiert.

ABAP-Demoprogramm

* Chart-Demoprogramme
* GRAPHICS_GUI_CE_DEMO
* GRAPHICS_IGS_CE_TEST
* RSORA_TCS_DEMO

* Chart-Klassen
* CL_GUI_CHART_ENGINE
* CL_IGS_CHART_ENGINE
* CL_TIME_CHART_SIMPLE

DATA: it_sflight TYPE STANDARD TABLE OF sflight.
* globales Chart-Objekt
DATA: o_chart TYPE REF TO cl_gui_chart_engine.

CLASS lcl_events DEFINITION.
  PUBLIC SECTION.

    TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.

* Buttons
    CONSTANTS: co_btn_load_cust TYPE string VALUE 'BTN_LOAD_CUST'.
    CONSTANTS: co_btn_load_data TYPE string VALUE 'BTN_LOAD_DATA'.
    CONSTANTS: co_btn_save_cust TYPE string VALUE 'BTN_SAVE_CUST'.
    CONSTANTS: co_btn_print TYPE string VALUE 'BTN_PRINT'.
    CONSTANTS: co_btn_example_bar TYPE string VALUE 'BTN_EXAMPLE_BAR'.
    CONSTANTS: co_btn_example_scatter TYPE string VALUE 'BTN_EXAMPLE_SCATTER'.
    CONSTANTS: co_btn_clear TYPE string VALUE 'BTN_CLEAR'.

    CLASS-METHODS: on_click FOR EVENT click OF cl_gui_chart_engine
      IMPORTING
          element
          series
          point
          sender.
    CLASS-METHODS: on_value_change FOR EVENT value_change OF cl_gui_chart_engine
      IMPORTING
          series
          point
          value
          sender.
    CLASS-METHODS: on_property_change FOR EVENT property_change OF cl_gui_chart_engine
      IMPORTING
          element
          name
          value
          sender.

    CLASS-METHODS:
      on_function_selected FOR EVENT function_selected OF cl_gui_toolbar
        IMPORTING
            fcode
            sender.
ENDCLASS.

CLASS lcl_events IMPLEMENTATION.
* Klick auf Chart
  METHOD on_click.
    MESSAGE |Klick: { element } { series } { point }| TYPE 'S'.
  ENDMETHOD.

* Chart Wertänderung
  METHOD on_value_change.
    MESSAGE |Wert geändert: { series } { point } { value }| TYPE 'S'.
  ENDMETHOD.

* Chart Property-Änderung
  METHOD on_property_change.
    MESSAGE |Property: { element } { name } { value }| TYPE 'S'.
  ENDMETHOD.

* Toolbar Button geklickt
  METHOD on_function_selected.

    CASE fcode.
* Graph drucken
      WHEN co_btn_print.
        IF o_chart IS BOUND.
          DATA(o_cewp) = CAST cl_gui_chart_engine_win( o_chart->get_control( ) ).
          o_cewp->print( ).
        ENDIF.
* Graph zurücksetzen
      WHEN co_btn_clear.
        IF o_chart IS BOUND.
* Initialdaten setzen
          o_chart->set_data( data = '<?xml version="1.0" encoding="utf-8"?><SimpleChartData></SimpleChartData>' ).
* Initial-Customizing setzen
          o_chart->set_customizing( data = '<?xml version="1.0" encoding="utf-8"?><SAPChartCustomizing version="2.0"></SAPChartCustomizing>' ).
        ENDIF.
**********************************************************************
* Bargraph
* einfaches Balkendiagramm, bei dem jeweils 2 Punkte einer Series
* einer Kategorie zugeordnet werden
**********************************************************************
      WHEN co_btn_example_bar.
        IF o_chart IS BOUND.
* Initialdaten setzen
          o_chart->set_data( data_table = VALUE w3htmltabtype( ( |<?xml version="1.0" encoding="utf-8"?>| )
                                                               ( |<ChartData>| )
                                                               ( |  <Categories>| )
                                                               ( |    <Category>Category 1</Category>| )
                                                               ( |    <Category>Category 2</Category>| )
                                                               ( |    <Category>Category 3</Category>| )
                                                               ( |  </Categories>| )
                                                               ( |  <Series customizing="Series1" label="Series 1">| )
                                                               ( |    <Point>| )
                                                               ( |      <Value type="y">5</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point>| )
                                                               ( |      <Value type="y">10</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point>| )
                                                               ( |      <Value type="y">7</Value>| )
                                                               ( |    </Point>| )
                                                               ( |  </Series>| )
                                                               ( |  <Series customizing="Series2" label="Series 2">| )
                                                               ( |    <Point>| )
                                                               ( |      <Value type="y">7</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point>| )
                                                               ( |      <Value type="y">9</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point>| )
                                                               ( |      <Value type="y">23</Value>| )
                                                               ( |    </Point>| )
                                                               ( |  </Series>| )
                                                               ( |</ChartData>| ) ) ).
* Initial-Customizing setzen
          o_chart->set_customizing( data_table = VALUE w3htmltabtype( ( |<?xml version="1.0" encoding="utf-8"?>| )
                                                                      ( |<SAPChartCustomizing version="2.0">| )
                                                                      ( | <GlobalSettings>| )
                                                                      ( |  <Defaults>| )
                                                                      ( |   <ChartType>Columns</ChartType>| )
                                                                      ( |   <FontFamily>Arial</FontFamily>| )
                                                                      ( |  </Defaults>| )
                                                                      ( | </GlobalSettings>| )
                                                                      ( | <Elements>| )
                                                                      ( |  <ChartElements>| )
                                                                      ( |   <Title>| )
                                                                      ( |    <Caption>Bargraph</Caption>| )
                                                                      ( |   </Title>| )
                                                                      ( |  </ChartElements>| )
                                                                      ( | </Elements>| )
                                                                      ( |</SAPChartCustomizing>| ) ) ).
        ENDIF.
**********************************************************************
* Scatterplot
* x,y-Punkte-Diagramm mit zwei Linien (Series)
* Vorgabe von Achse (min, max), Punkteigenschaften, Farbe, Legende
**********************************************************************
      WHEN co_btn_example_scatter.
        IF o_chart IS BOUND.
* Initialdaten setzen
          o_chart->set_data( data_table = VALUE w3htmltabtype( ( |<?xml version="1.0" encoding="utf-8"?>| )
                                                               ( |<ChartData>| )
                                                               ( |  <Series customizing="Series1" label="y1">| )
                                                               ( |    <Point label="P1">| )
                                                               ( |      <Value type="x">-5.1</Value>| )
                                                               ( |      <Value type="y">-2.3</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point label="P2">| )
                                                               ( |      <Value type="x">1.2</Value>| )
                                                               ( |      <Value type="y">1.1</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point label="P3">| )
                                                               ( |      <Value type="x">6.2</Value>| )
                                                               ( |      <Value type="y">7.4</Value>| )
                                                               ( |    </Point>| )
                                                               ( |  </Series>| )
                                                               ( |  <Series customizing="Series2" label="y2">| )
                                                               ( |    <Point label="P1">| )
                                                               ( |      <Value type="x">-5.1</Value>| )
                                                               ( |      <Value type="y">0.3</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point label="P2">| )
                                                               ( |      <Value type="x">1.2</Value>| )
                                                               ( |      <Value type="y">3.5</Value>| )
                                                               ( |    </Point>| )
                                                               ( |    <Point label="P3">| )
                                                               ( |      <Value type="x">6.2</Value>| )
                                                               ( |      <Value type="y">8.9</Value>| )
                                                               ( |    </Point>| )
                                                               ( |  </Series>| )
                                                               ( |</ChartData>| ) ) ).
* Initial-Customizing setzen
          o_chart->set_customizing( data_table = VALUE w3htmltabtype( ( |<?xml version="1.0" encoding="utf-8"?>| )
                                                                      ( |<SAPChartCustomizing version="2.0">| )
                                                                      ( | <GlobalSettings>| )
                                                                      ( |  <Dimension>Two</Dimension>| )
                                                                      ( |  <ColorPalette>Tradeshow</ColorPalette>| )
                                                                      ( |  <Defaults>| )
                                                                      ( |   <ChartType>Scatter</ChartType>| )
                                                                      ( |   <FontFamily>Arial</FontFamily>| )
                                                                      ( |  </Defaults>| )
                                                                      ( | </GlobalSettings>| )
                                                                      ( | <Elements>| )
                                                                      ( |  <ChartElements>| )
                                                                      ( |   <Title>| )
                                                                      ( |    <Caption>Scatterplot</Caption>| )
                                                                      ( |   </Title>| )
                                                                      ( |   <Subtitle>| )
                                                                      ( |    <Caption>Daten und Settings</Caption>| )
                                                                      ( |   </Subtitle>| )
                                                                      ( |   <Legend>| )
                                                                      ( |    <Alignment>ToPlotArea</Alignment>| )
                                                                      ( |    <Position>TopRight</Position>| )
                                                                      ( |   </Legend>| )
                                                                      ( |  </ChartElements>| )
                                                                      ( |  <ChartAxes>| )
                                                                      ( |   <ValueAxis id="ValueAxis1">| )
                                                                      ( |    <Visibility>true</Visibility>| )
                                                                      ( |    <Minimum>-10</Minimum>| )
                                                                      ( |    <MinimumCalculation>UserDefined</MinimumCalculation>| )
                                                                      ( |    <Maximum>10</Maximum>| )
                                                                      ( |    <MaximumCalculation>UserDefined</MaximumCalculation>| )
                                                                      ( |    <ScalingType>Linear</ScalingType>| )
                                                                      ( |    <Order>Ascending</Order>| )
                                                                      ( |    <Position>Primary</Position>| )
                                                                      ( |    <Title>| )
                                                                      ( |     <Caption>x</Caption>| )
                                                                      ( |    </Title>| )
                                                                      ( |   </ValueAxis>| )
                                                                      ( |   <ValueAxis id="ValueAxis2">| )
                                                                      ( |    <Visibility>true</Visibility>| )
                                                                      ( |    <Minimum>-10</Minimum>| )
                                                                      ( |    <MinimumCalculation>UserDefined</MinimumCalculation>| )
                                                                      ( |    <Maximum>10</Maximum>| )
                                                                      ( |    <MaximumCalculation>UserDefined</MaximumCalculation>| )
                                                                      ( |    <ScalingType>Linear</ScalingType>| )
                                                                      ( |    <Order>Ascending</Order>| )
                                                                      ( |    <Position>Primary</Position>| )
                                                                      ( |    <Title>| )
                                                                      ( |     <Caption>x</Caption>| )
                                                                      ( |    </Title>| )
                                                                      ( |   </ValueAxis>| )
                                                                      ( |  </ChartAxes>| )
                                                                      ( | </Elements>| )
                                                                      ( | <Values>| )
                                                                      ( |  <Series>| )
                                                                      ( |   <ShowLabel>true</ShowLabel>| )
                                                                      ( |   <LineColor>@20</LineColor>| )
                                                                      ( |  </Series>| )
                                                                      ( |  <Series id="Series1">| )
                                                                      ( |   <ShowLabel>true</ShowLabel>| )
                                                                      ( |   <LineColor>@20</LineColor>| )
                                                                      ( |   <Color>@20</Color>| )
                                                                      ( |  </Series>| )
                                                                      ( |  <Series id="Series2">| )
                                                                      ( |   <ShowLabel>true</ShowLabel>| )
                                                                      ( |   <LineColor>@60</LineColor>| )
                                                                      ( |   <Color>@60</Color>| )
                                                                      ( |  </Series>| )
                                                                      ( | </Values>| )
                                                                      ( |</SAPChartCustomizing>| ) ) ).
        ENDIF.
* XML Chart-Customizing speichern
      WHEN co_btn_save_cust.
        IF o_chart IS BOUND.
          DATA: it_xml TYPE w3htmltabtype.

          DATA(o_cew_save) = CAST cl_gui_chart_engine_win( o_chart->get_control( ) ).
          o_cew_save->get_customizing( IMPORTING data_table = it_xml ).

          DATA: lv_action TYPE i.
          DATA: lv_filename TYPE string.
          DATA: lv_fullpath TYPE string.
          DATA: lv_path TYPE string.

          TRY.
* Savedialog anzeigen
              cl_gui_frontend_services=>file_save_dialog( EXPORTING
                                                            default_file_name = 'chart.xml'
                                                            default_extension = 'xml'
                                                            file_filter       = |XML (*.xml)\|*.xml\|{ cl_gui_frontend_services=>filetype_all }|
                                                          CHANGING
                                                            filename          = lv_filename
                                                            path              = lv_path
                                                            fullpath          = lv_fullpath
                                                            user_action       = lv_action ).

              IF lv_action EQ cl_gui_frontend_services=>action_ok.

* XML-Daten lokal speichern
                cl_gui_frontend_services=>gui_download( EXPORTING
                                                          filename = lv_fullpath
                                                          filetype = 'BIN'
                                                        CHANGING
                                                          data_tab = it_xml ).

              ENDIF.
            CATCH cx_root INTO DATA(e_txt).
              MESSAGE e_txt->get_text( ) TYPE 'E'.
          ENDTRY.
        ENDIF.
* XML Chart-Customizing laden
      WHEN co_btn_load_cust.
        IF o_chart IS BOUND.
          DATA: lv_rc_cust TYPE i.
          DATA: it_files_cust TYPE filetable.
          DATA: lv_action_open_cust TYPE i.

* FileOpen-Dialog aufrufen
          TRY.
              cl_gui_frontend_services=>file_open_dialog( EXPORTING
                                                            file_filter = |XML (*.xml)\|*.xml\|{ cl_gui_frontend_services=>filetype_all }|
                                                          CHANGING
                                                            file_table  = it_files_cust
                                                            rc          = lv_rc_cust
                                                            user_action = lv_action_open_cust ).

              IF lv_action_open_cust = cl_gui_frontend_services=>action_ok.
* wenn Datei ausgewählt wurde
                IF lines( it_files_cust ) > 0.

                  DATA: lv_filesize_cust TYPE w3param-cont_len.
                  DATA: it_xml_cust_up TYPE w3htmltabtype.

                  cl_gui_frontend_services=>gui_upload( EXPORTING
                                                          filename   = |{ it_files_cust[ 1 ]-filename }|
                                                          filetype   = 'BIN'
                                                        IMPORTING
                                                          filelength = lv_filesize_cust
                                                        CHANGING
                                                          data_tab   = it_xml_cust_up ).

* XML-Daten setzen
                  o_chart->set_customizing( data_table = it_xml_cust_up ).

                ENDIF.
              ENDIF.

            CATCH cx_root INTO DATA(e_text_cust).
              MESSAGE e_text_cust->get_text( ) TYPE 'S' DISPLAY LIKE 'E'.
          ENDTRY.

        ENDIF.
* XML Chart-Daten laden
      WHEN co_btn_load_data.
        IF o_chart IS BOUND.
          DATA: lv_rc_data TYPE i.
          DATA: it_files_data TYPE filetable.
          DATA: lv_action_open_data TYPE i.

* FileOpen-Dialog aufrufen
          TRY.
              cl_gui_frontend_services=>file_open_dialog( EXPORTING
                                                            file_filter = |XML (*.xml)\|*.xml\|{ cl_gui_frontend_services=>filetype_all }|
                                                          CHANGING
                                                            file_table  = it_files_data
                                                            rc          = lv_rc_data
                                                            user_action = lv_action_open_data ).

              IF lv_action_open_data = cl_gui_frontend_services=>action_ok.
* wenn Datei ausgewählt wurde
                IF lines( it_files_data ) > 0.

                  DATA: lv_filesize_data TYPE w3param-cont_len.
                  DATA: it_xml_data_up TYPE w3htmltabtype.

                  cl_gui_frontend_services=>gui_upload( EXPORTING
                                                          filename   = |{ it_files_data[ 1 ]-filename }|
                                                          filetype   = 'BIN'
                                                        IMPORTING
                                                          filelength = lv_filesize_data
                                                        CHANGING
                                                          data_tab   = it_xml_data_up ).

* XML-Daten setzen
                  o_chart->set_data( data_table = it_xml_data_up ).

                ENDIF.
              ENDIF.

            CATCH cx_root INTO DATA(e_text_data).
              MESSAGE e_text_data->get_text( ) TYPE 'S' DISPLAY LIKE 'E'.
          ENDTRY.

        ENDIF.
    ENDCASE.
  ENDMETHOD.
ENDCLASS.

INITIALIZATION.
**********************************************************************
* GUI
**********************************************************************
* Splitter erzeugen
  DATA(o_splitter) = NEW cl_gui_splitter_container( parent = cl_gui_container=>default_screen
                                                    no_autodef_progid_dynnr = abap_true
                                                    rows = 2
                                                    columns = 1 ).

* absoluter Modus für Zeilenhöhe
  o_splitter->set_row_mode( mode = cl_gui_splitter_container=>mode_absolute ).

* Höhe absolut 24 Pixel für Splitter oben
  o_splitter->set_row_height( id = 1 height = 24 ).

* Splitter für oberen Container fest und verborgen
  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_movable
                            value = cl_gui_splitter_container=>false ).

  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_sashvisible
                            value = cl_gui_splitter_container=>false ).

* Top- und Bottom-Container holen
  DATA(o_container_top) = o_splitter->get_container( row = 1 column = 1 ).
  DATA(o_container_bottom) = o_splitter->get_container( row = 2 column = 1 ).

* Toolbar hoizontal
  DATA(o_tool) = NEW cl_gui_toolbar( parent       = o_container_top
                                     display_mode = cl_gui_toolbar=>m_mode_horizontal ).

* Eventtypten müssen gesondert registriert werden
  DATA(it_events) = VALUE lcl_events=>ty_it_events( ( eventid    = cl_gui_toolbar=>m_id_function_selected
                                                      appl_event = abap_true ) ).

  o_tool->set_registered_events( events = it_events ).

* Toolbar-Buttons hinzufügen
* Buttontypen sind in Typgruppe CNTB definiert
  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_load_cust )
                      icon        = icon_open
                      butn_type   = cntb_btype_button
                      text        = 'Load settings'
                      quickinfo   = 'Load chart settings'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_save_cust )
                      icon        = icon_system_save
                      butn_type   = cntb_btype_button
                      text        = 'Save settings'
                      quickinfo   = 'Save chart settings'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_load_data )
                      icon        = icon_open
                      butn_type   = cntb_btype_button
                      text        = 'Load data'
                      quickinfo   = 'Load chart data'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_example_bar )
                      icon        = icon_display
                      butn_type   = cntb_btype_button
                      text        = 'Beispiel Bargraph'
                      quickinfo   = 'Beispieldaten + Settings'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_example_scatter )
                      icon        = icon_display
                      butn_type   = cntb_btype_button
                      text        = 'Beispiel Scatterplot'
                      quickinfo   = 'Beispieldaten + Settings'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_clear )
                      icon        = icon_delete
                      butn_type   = cntb_btype_button
                      text        = 'Löschen'
                      quickinfo   = 'Alles löschen'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = CONV #( lcl_events=>co_btn_print )
                      icon        = icon_print
                      butn_type   = cntb_btype_button
                      text        = 'Drucken'
                      quickinfo   = 'Chart drucken'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

* Eventhandler registrieren
  SET HANDLER lcl_events=>on_function_selected FOR o_tool.

**********************************************************************
* Chart
**********************************************************************
* Daten holen
  SELECT * FROM sflight INTO TABLE it_sflight UP TO 10 ROWS.

* Chart in unteren GUI-Container einbetten
  o_chart = NEW #( parent = o_container_bottom ).

**********************************************************************
* Chart-Daten generieren
**********************************************************************
* leere Defaultdaten übergeben
  DATA(it_xml_data) = VALUE w3htmltabtype( ).
  o_chart->set_data( data_table = it_xml_data ).

**********************************************************************
* Chart-Customizing generieren
**********************************************************************
* leere Defaultdaten übergeben
  DATA(it_xml_customizing) = VALUE w3htmltabtype( ).
  o_chart->set_customizing( data_table = it_xml_customizing ).

**********************************************************************
* zus. Einstellungen
**********************************************************************
* Einstellungsdialoge anzeigen
  DATA(o_adj) = CAST cl_gui_chart_engine_win( o_chart->get_control( ) ).
* Design-Anpassungen ermöglichen
  o_adj->set_design_mode( flag = abap_true event = abap_true ).
* Einstellmöglichkeiten beschränken
*  o_adj->restrict_chart_types( charttypes = 'Columns|Lines' ).
*  o_adj->restrict_property_events( events = 'ChartType' ).

* Wertänderungen ermöglichen
  o_adj->enable_value_change( ).

* Event-Handler registrieren
  SET HANDLER lcl_events=>on_click FOR o_chart.
  SET HANDLER lcl_events=>on_value_change FOR o_chart.
  SET HANDLER lcl_events=>on_property_change FOR o_chart.

* Graph anzeigen
  o_chart->render( ).

* leere Toolbar ausblenden
  cl_abap_list_layout=>suppress_toolbar( ).

* cl_gui_container=>default_screen erzingen
  WRITE: / space.

Weitere XML-Beispiele

Customizing für Scatter-Plot

<?xml version="1.0" encoding="utf-8"?>
<SAPChartCustomizing version="2.0">
 <GlobalSettings>
  <Dimension>Two</Dimension>
  <Defaults>
   <ChartType>Scatter</ChartType>
   <FontFamily>Arial</FontFamily>
  </Defaults>
 </GlobalSettings>
 <Elements>
  <ChartElements>
   <Title>
    <Caption>Beispiel-Titel</Caption>
   </Title>
   <Subtitle>
    <Caption>Untertitel</Caption>
   </Subtitle>
   <Legend>
    <Alignment>ToPlotArea</Alignment>
    <Position>Right</Position>
   </Legend>
  </ChartElements>
  <ChartAxes>
   <ValueAxis id="ValueAxis1">
    <Visibility>true</Visibility>
    <MinimumCalculation>Automatic</MinimumCalculation>
    <MaximumCalculation>Automatic</MaximumCalculation>
    <ScalingType>Linear</ScalingType>
    <Order>Ascending</Order>
    <Position>Primary</Position>
    <Title>
     <Caption>x</Caption>
    </Title>
   </ValueAxis>
  </ChartAxes>
 </Elements>
</SAPChartCustomizing>

Daten für Scatter-Plot

<?xml version="1.0" encoding="utf-8"?>
<ChartData>
  <Categories>
    <Category>Category 1</Category>
  </Categories>
  <Series customizing="Series1" label="y">
    <Point label="P1">
      <Value type="x">0</Value>
      <Value type="y">5</Value>
    </Point>
    <Point label="P2">
      <Value type="x">1</Value>
      <Value type="y">10</Value>
    </Point>
    <Point label="P3">
      <Value type="x">2</Value>
      <Value type="y">7</Value>
    </Point>
  </Series>
</ChartData>

Customizing für Bar-Chart

<?xml version="1.0" encoding="utf-8"?>
<SAPChartCustomizing version="2.0">
 <GlobalSettings>
  <Defaults>
   <ChartType>Columns</ChartType>
   <FontFamily>Arial</FontFamily>
  </Defaults>
 </GlobalSettings>
 <Elements>
  <ChartElements>
   <Title>
    <Visibility>true</Visibility>
    <Caption>Caption1</Caption>
   </Title>
  </ChartElements>
 </Elements>
</SAPChartCustomizing>

Daten für Bar-Chart

<?xml version="1.0" encoding="utf-8"?>
<ChartData>
  <Categories>
    <Category>Category 1</Category>
    <Category>Category 2</Category>
    <Category>Category 3</Category>
  </Categories>
  <Series customizing="Series1" label="Series 1">
    <Point>
      <Value type="y">5</Value>
    </Point>
    <Point>
      <Value type="y">10</Value>
    </Point>
    <Point>
      <Value type="y">7</Value>
    </Point>
  </Series>
  <Series customizing="Series2" label="Series 2">
    <Point>
      <Value type="y">7</Value>
    </Point>
    <Point>
      <Value type="y">9</Value>
    </Point>
    <Point>
      <Value type="y">23</Value>
    </Point>
  </Series>
</ChartData>

Weiterführende Infos

Easy Charts
Creating Charts
abapblog.com
catmull rom
Custom Chart Creation

[ABAP] GUI-Toolbar mit statischem Context-Menü, Eventhandling

TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.

CLASS lcl_events DEFINITION.
  PUBLIC SECTION.
    CLASS-METHODS:
      on_function_selected FOR EVENT function_selected OF cl_gui_toolbar
        IMPORTING
            fcode
            sender.
ENDCLASS.

CLASS lcl_events IMPLEMENTATION.
* Toolbar: Button oder Menüpunkt geklickt
  METHOD on_function_selected.

* Funktionscode auswerten
    CASE fcode.
      WHEN 'BTN_CLOSE'.
        LEAVE PROGRAM.
      WHEN 'M1'.
      WHEN 'M2'.
    ENDCASE.

* fcode ausgeben
    MESSAGE fcode TYPE 'S'.

  ENDMETHOD.
ENDCLASS.

INITIALIZATION.

* Splitter erzeugen
  DATA(o_splitter) = NEW cl_gui_splitter_container( parent = cl_gui_container=>default_screen
                                                    no_autodef_progid_dynnr = abap_true
                                                    rows = 2
                                                    columns = 1 ).

* Absoluter Modus für Zeilenhöhe
  o_splitter->set_row_mode( mode = cl_gui_splitter_container=>mode_absolute ).

* Höhe absolut 24 Pixel für Splitter oben
  o_splitter->set_row_height( id = 1 height = 24 ).

* Splitter für oberen Container fest und verborgen
  o_splitter->set_row_sash( id    = 1
                            type  = cl_gui_splitter_container=>type_movable
                            value = cl_gui_splitter_container=>false ).

  o_splitter->set_row_sash( id    = 1
                            type  = cl_gui_splitter_container=>type_sashvisible
                            value = cl_gui_splitter_container=>false ).

  DATA(o_container_top) = o_splitter->get_container( row = 1 column = 1 ).
  DATA(o_container_bottom) = o_splitter->get_container( row = 2 column = 1 ).

* Toolbar hoizontal
  DATA(o_tool) = NEW cl_gui_toolbar( parent       = o_container_top
                                     display_mode = cl_gui_toolbar=>m_mode_horizontal ).

* Eventtypten müssen gesondert registriert werden
  DATA(it_events) = VALUE ty_it_events( ( eventid    = cl_gui_toolbar=>m_id_function_selected
                                          appl_event = abap_true ) ).

  o_tool->set_registered_events( events = it_events ).

* Toolbar-Buttons und Menüs hinzufügen
* Buttontypen sind in Typgruppe CNTB definiert
  o_tool->add_button( fcode       = 'BTN_MENU'
                      icon        = icon_activate
                      butn_type   = cntb_btype_menu
                      text        = 'Menü'
                      quickinfo   = 'Menü anzeigen'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

* statisches Kontextmenü für Button "BTN_MENU" erstellen
  DATA(o_menu) = NEW cl_ctmenu( ).
  o_menu->add_function( fcode   = 'M1'
                        checked = abap_false
                        text    = 'Punkt1' ).

  o_menu->add_function( fcode   = 'M2'
                        checked = abap_false
                        text    = 'Punkt2' ).

* statisches Kontextmenü mit Button verknüpfen, Zuordnung erfolgt über den Namen
* daher muss "function" gleich "fcode" des Menü-Buttons sein, sonst Exception
  DATA(it_ctxmenu) = VALUE ttb_btnmnu( ( function = 'BTN_MENU'
                                         ctmenu   = o_menu ) ).

* siehe auch Methode "set_static_ctxmenu"
  o_tool->assign_static_ctxmenu_table( it_ctxmenu ).

* Separator
  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

* Schließen-Button
  o_tool->add_button( fcode       = 'BTN_CLOSE'
                      icon        = icon_close
                      butn_type   = cntb_btype_button
                      text        = 'Schließen'
                      quickinfo   = 'Schließen'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

* Eventhandler registrieren
  SET HANDLER lcl_events=>on_function_selected FOR o_tool.

* im unteren Splitter Beispieldaten anzeigen
  DATA: it_sflight TYPE STANDARD TABLE OF sflight.

  SELECT * FROM sflight INTO TABLE @it_sflight.

  DATA: o_salv TYPE REF TO cl_salv_table.

  cl_salv_table=>factory( EXPORTING
                            r_container  = o_container_bottom
                          IMPORTING
                            r_salv_table = o_salv
                          CHANGING
                            t_table      = it_sflight ).

  o_salv->get_functions( )->set_all( ).
  o_salv->display( ).

* leere Standard-Toolbar ausblenden
  cl_abap_list_layout=>suppress_toolbar( ).

* Ausgabe von cl_gui_container=>default_screen erzwingen
  WRITE: space.

[ABAP] GUI-Toolbar mit dynamischen Context-Menü, Eventhandling, Umschaltung checked-state

TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.

TYPES: BEGIN OF ty_menuitem,
         fcode   TYPE ui_func,
         checked TYPE cua_active,
         text    TYPE gui_text,
       END OF ty_menuitem.

TYPES: ty_it_menuitems TYPE STANDARD TABLE OF ty_menuitem WITH DEFAULT KEY.

DATA: it_menuitems TYPE ty_it_menuitems.

CLASS lcl_events DEFINITION.
  PUBLIC SECTION.
    CLASS-METHODS:
      on_function_selected FOR EVENT function_selected OF cl_gui_toolbar
        IMPORTING
            fcode
            sender.
    CLASS-METHODS:
      on_dropdown_clicked FOR EVENT dropdown_clicked OF cl_gui_toolbar
        IMPORTING
            fcode
            posx
            posy
            sender.
ENDCLASS.

CLASS lcl_events IMPLEMENTATION.
* Toolbar: Button oder Menüpunktgeklickt
  METHOD on_function_selected.

* Checked-Status eines Dropdown-Menüpunktes umschalten
    IF line_exists( it_menuitems[ fcode = fcode ] ).
      ASSIGN it_menuitems[ fcode = fcode ] TO FIELD-SYMBOL(<mc>).
      <mc>-checked = COND #( WHEN <mc>-checked = abap_true THEN abap_false ELSE abap_true ).
    ENDIF.

* Funktionscode auswerten
    CASE fcode.
      WHEN 'BTN_CLOSE'.
        LEAVE PROGRAM.
      WHEN 'BTN_DROP'.
      WHEN 'M1'.
      WHEN 'M2'.
    ENDCASE.

* fcode ausgeben
    MESSAGE fcode TYPE 'S'.

  ENDMETHOD.
* Toolbar: Dropdown aktiviert
  METHOD on_dropdown_clicked.
* Menü erzeugen
    DATA(o_ctx_menu) = NEW cl_ctmenu( ).

    LOOP AT it_menuitems ASSIGNING FIELD-SYMBOL(<m>).
      o_ctx_menu->add_function( fcode   = <m>-fcode
                                checked = <m>-checked
                                text    = <m>-text ).
    ENDLOOP.

* Kontextmenü an der akt. Position anzeigen
    sender->track_context_menu( context_menu = o_ctx_menu
                                posx         = posx
                                posy         = posy ).
  ENDMETHOD.
ENDCLASS.

INITIALIZATION.

  it_menuitems = VALUE #( ( fcode   = 'M1'
                            checked = abap_false
                            text    = 'Punkt1' )
                          ( fcode   = 'M2'
                            checked = abap_true
                            text    = 'Punkt2' ) ).

* Splitter erzeugen
  DATA(o_splitter) = NEW cl_gui_splitter_container( parent = cl_gui_container=>default_screen
                                                    no_autodef_progid_dynnr = abap_true
                                                    rows = 2
                                                    columns = 1 ).

* Absoluter Modus für Zeilenhöhe
  o_splitter->set_row_mode( mode = cl_gui_splitter_container=>mode_absolute ).

* Höhe absolut 24 Pixel für Splitter oben
  o_splitter->set_row_height( id = 1 height = 24 ).

* Splitter für oberen Container fest und verborgen
  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_movable
                            value = cl_gui_splitter_container=>false ).

  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_sashvisible
                            value = cl_gui_splitter_container=>false ).

  DATA(o_container_top) = o_splitter->get_container( row = 1 column = 1 ).
  DATA(o_container_bottom) = o_splitter->get_container( row = 2 column = 1 ).

* Toolbar hoizontal
  DATA(o_tool) = NEW cl_gui_toolbar( parent = o_container_top
                                     display_mode = cl_gui_toolbar=>m_mode_horizontal ).

* Eventtypten müssen gesondert registriert werden
  DATA(it_events) = VALUE ty_it_events( ( eventid = cl_gui_toolbar=>m_id_function_selected
                                          appl_event = abap_true )
                                        ( eventid = cl_gui_toolbar=>m_id_dropdown_clicked
                                          appl_event = abap_true ) ).

  o_tool->set_registered_events( events = it_events ).

* Toolbar-Buttons hinzufügen
* Buttontypen sind in Typgruppe CNTB definiert
  o_tool->add_button( fcode       = 'BTN_DROP'
                      icon        = icon_activate
                      butn_type   = cntb_btype_dropdown
                      text        = 'Menü'
                      quickinfo   = 'Menü anzeigen'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = 'BTN_CLOSE'
                      icon        = icon_close
                      butn_type   = cntb_btype_button
                      text        = 'Schließen'
                      quickinfo   = 'Schließen'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

* Eventhandler registrieren
  SET HANDLER lcl_events=>on_function_selected FOR o_tool.
  SET HANDLER lcl_events=>on_dropdown_clicked FOR o_tool.

* im unteren Splitter Beispieldaten anzeigen
  DATA: it_sflight TYPE STANDARD TABLE OF sflight.

  SELECT * FROM sflight INTO TABLE @it_sflight.

  DATA: o_salv TYPE REF TO cl_salv_table.

  cl_salv_table=>factory( EXPORTING
                            r_container    = o_container_bottom
                          IMPORTING
                            r_salv_table   = o_salv
                          CHANGING
                            t_table        = it_sflight ).

  o_salv->get_functions( )->set_all( ).
  o_salv->display( ).

* leere Standard-Toolbar ausblenden
  cl_abap_list_layout=>suppress_toolbar( ).

* Ausgabe von cl_gui_container=>default_screen erzwingen
  WRITE: space.

Weiterführender Link zur Ideen-Quelle: Link

[ABAP] Selektionsbild mit HTML-Elementen, Dateneingabe, SALV-Grid, CSS, Eventhandling

**********************************************************************
*
* Datentypen, Variablen, Konstanten
*
**********************************************************************
TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.

CONSTANTS: co_carrid TYPE string VALUE 'carrid'.
CONSTANTS: co_airpto TYPE string VALUE 'airpto'.

DATA: o_splitter_main TYPE REF TO cl_gui_splitter_container.
DATA: o_container_l   TYPE REF TO cl_gui_container.
DATA: o_container_r   TYPE REF TO cl_gui_container.
DATA: o_html TYPE REF TO cl_gui_html_viewer.
DATA: o_salv TYPE REF TO cl_salv_table.

DATA: it_spfli TYPE STANDARD TABLE OF spfli WITH DEFAULT KEY.
DATA: it_salv_spfli TYPE STANDARD TABLE OF spfli WITH DEFAULT KEY.
DATA: it_sairport TYPE STANDARD TABLE OF sairport WITH DEFAULT KEY.

DATA: it_html TYPE html_table.
**********************************************************************
*
* Eventhandler
*
**********************************************************************
CLASS lcl_html_events DEFINITION.
  PUBLIC SECTION.
    CLASS-METHODS:
      on_sapevent FOR EVENT sapevent OF cl_gui_html_viewer
        IMPORTING
            action
            frame
            getdata
            postdata
            query_table
            sender.
ENDCLASS.

CLASS lcl_html_events IMPLEMENTATION.
* Link- oder Button-Klick
  METHOD on_sapevent.
    IF o_salv IS BOUND.
      TRY.
* Element in der Nodes-Tabelle lesen
          ASSIGN query_table[ name = co_carrid ] TO FIELD-SYMBOL(<carrid>).
          ASSIGN query_table[ name = co_airpto ] TO FIELD-SYMBOL(<airpto>).

          IF <carrid> IS ASSIGNED AND <airpto> IS ASSIGNED.
* iTab für SALV-Table neu aufbauen, abhängig von der Eingabe in den Formularfeldern
            it_salv_spfli = VALUE #( FOR <f> IN it_spfli WHERE ( ( carrid = <carrid>-value ) AND ( airpto = <airpto>-value ) )
                                     ( <f> )
                                   ).

          ENDIF.

* SALV-Table neu anzeigen
          o_salv->refresh( ).
        CATCH cx_root INTO DATA(e_txt).
          MESSAGE e_txt->get_text( ) TYPE 'S'.
      ENDTRY.
    ENDIF.
  ENDMETHOD.
ENDCLASS.
**********************************************************************
*
* SELECTION-SCREEN
*
**********************************************************************
* leeres Selektionsbild als Dummy für die Container-Objekte (o_splitter_main ...)
SELECTION-SCREEN BEGIN OF SCREEN 2000.
SELECTION-SCREEN END OF SCREEN 2000.
**********************************************************************
*
* INITIALIZATION
*
**********************************************************************
INITIALIZATION.
* Daten holen
  SELECT * INTO TABLE it_spfli FROM spfli.
  SELECT * INTO TABLE it_sairport FROM sairport.

* HTML-Code mit Buttons und Forms
  it_html = VALUE #(
                     ( |<html>| )
                     ( |  <head>| )
                     ( |    <meta http-equiv="content-type" content="text/html; charset=utf-8">| )
                     ( |    <script type="text/javascript">| )
                     ( |      function onKeyDown(f)| )
                     ( |      \{ if(event.keyCode == 13)| )
                     ( |         \{ document[f.name].submit();| )
                     ( |         \}| )
                     ( |      \}| )
                     ( |    </script>| )
                     ( |    <style type="text/css">| )
                     ( |       body \{| )
                     ( |         font-family: Courier New;| )
                     ( |         font-size: 13px;| )
                     ( |         font-style: normal;| )
                     ( |         font-variant: normal;| )
                     ( |         font-weight: 400;| )
                     ( |         line-height: 13px;| )
                     ( |       \}| )
                     ( |       form \{| )
                     ( |         background: lightblue;| )
                     ( |       \}| )
                     ( |       label \{| )
                     ( |         text-align: right;| )
                     ( |         line-height: 1.5;| )
                     ( |         float: left;| )
                     ( |         width: 40%;| )
                     ( |       \}| )
                     ( |       input \{| )
                     ( |         margin: 0 0 1em .2em;| )
                     ( |         padding: .2em .5em;| )
                     ( |         background-color: #fffbf0;| )
                     ( |         border: 1px solid #e7c157;| )
                     ( |         float: left;| )
                     ( |         width: 40%;| )
                     ( |         font-family: Courier New;| )
                     ( |         font-size: 13px;| )
                     ( |         font-style: normal;| )
                     ( |         font-variant: normal;| )
                     ( |         font-weight: 400;| )
                     ( |         line-height: 13px;| )
                     ( |       \}| )
                     ( |       select \{| )
                     ( |         margin: 0 0 1em .2em;| )
                     ( |         padding: .2em .5em;| )
                     ( |         background-color: #fffbf0;| )
                     ( |         border: 1px solid #e7c157;| )
                     ( |         float: left;| )
                     ( |         width: 40%;| )
                     ( |         font-family: Courier New;| )
                     ( |         font-size: 13px;| )
                     ( |         font-style: normal;| )
                     ( |         font-variant: normal;| )
                     ( |         font-weight: 400;| )
                     ( |         line-height: 13px;| )
                     ( |       \}| )
                     ( |       button \{| )
                     ( |         margin-top: 1.5em;| )
                     ( |         float: right;| )
                     ( |       \}| )
                     ( |      </style>| )
                     ( |  </head>| )
                     ( |  <body>| )
                     ( |    <form name="INPUT" accept-charset="utf-8" method="post" action="SAPEVENT:INPUT_FIELDS">| )
                     ( |      <br>| )
                     ( |      <label for="{ co_carrid }">Fluggesellschaft:</label>| )
                     ( |      <input type="text" name="{ co_carrid }" value="LH" onKeyDown="onKeyDown(this.form);">| )
                     ( |      <br>| )
                     ( |      <label for="{ co_airpto }">Zielflughafen:</label>| )
                     ( |      <select name="{ co_airpto }" value="JFK">| )
                   ).

  LOOP AT it_sairport ASSIGNING FIELD-SYMBOL(<a>).
    IF <a>-id = 'JFK'.
      APPEND |        <option selected>{ <a>-id }</option>| TO it_html.
    ELSE.
      APPEND |        <option>{ <a>-id }</option>| TO it_html.
    ENDIF.
  ENDLOOP.

  it_html = VALUE #( BASE it_html
                     ( |      </select>| )
                     ( |      <br>| )
                     ( |      <button type="submit" title="Anzeigen">Anzeigen</button>| )
                     ( |      <br>| )
                     ( |      <br>| )
                     ( |      <br>| )
                     ( |      <br>| )
                     ( |    </form>| )
                     ( |  </body>| )
                     ( |</html>| )
                   ).

**********************************************************************
*
* AT SELECTION-SCREEN OUTPUT
*
**********************************************************************
AT SELECTION-SCREEN OUTPUT.
* Doppelte Objekterzeugung unterbinden
  IF NOT o_splitter_main IS BOUND.
* Splitter auf default_screen (SELECTION-SCREEN 2000) erzeugen
    o_splitter_main = NEW #( parent  = cl_gui_container=>default_screen
                             rows    = 1
                             columns = 2 ).

* Breite in % (linke Spalte für den Tree)
    o_splitter_main->set_column_width( id = 1 width = 20 ).

* linken und rechten Splitcontainer holen
    o_container_l = o_splitter_main->get_container( row = 1 column = 1 ).
    o_container_r = o_splitter_main->get_container( row = 1 column = 2 ).

* HTML-Viewer
    o_html = NEW cl_gui_html_viewer( parent = o_container_l ).

* Eventtypten müssen gesondert registriert werden
    DATA(it_events) = VALUE ty_it_events( ( eventid    = cl_gui_html_viewer=>m_id_sapevent
                                            appl_event = abap_true ) ).

    o_html->set_registered_events( events = it_events ).

* Eventhandler registrieren
    SET HANDLER lcl_html_events=>on_sapevent FOR o_html.

* URL zu HTML holen
    DATA: lv_url TYPE skwf_url.

    o_html->load_data( IMPORTING
                         assigned_url = lv_url
                       CHANGING
                         data_table   = it_html ).

* HTML anzeigen
    o_html->show_url( url = lv_url ).

    it_salv_spfli = it_spfli.

* SALV-Table für Anzeige der Daten
    cl_salv_table=>factory( EXPORTING
                              r_container    = o_container_r
                            IMPORTING
                              r_salv_table   = o_salv
                            CHANGING
                              t_table        = it_salv_spfli ).

    o_salv->get_display_settings( )->set_striped_pattern( abap_true ).
    o_salv->get_columns( )->set_optimize( abap_true ).
    o_salv->get_functions( )->set_all( ).
    o_salv->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).
    o_salv->display( ).
  ENDIF.
**********************************************************************
*
* AT SELECTION-SCREEN
*
**********************************************************************
AT SELECTION-SCREEN.
* wenn "Ausführen" (F8) geklickt wurde
  IF sy-ucomm = 'CRET'.
* Selektionbild 2000 wieder anzeigen
    CALL SELECTION-SCREEN 2000.
  ENDIF.
**********************************************************************
*
* START-OF-SELECTION
*
**********************************************************************
START-OF-SELECTION.
* leeres Selektionbild 2000 anzeigen
  CALL SELECTION-SCREEN 2000.

[ABAP] Tree und SALV-Grid auf dem Selektionsbild ohne zus. Dynpro anzeigen, Eventhandling

**********************************************************************
*
* Datentypen, Variablen, Konstanten
*
**********************************************************************
TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.
TYPES: ty_it_nodes TYPE STANDARD TABLE OF mtreesnode WITH DEFAULT KEY.

DATA: o_splitter_main TYPE REF TO cl_gui_splitter_container.
DATA: o_container_l   TYPE REF TO cl_gui_container.
DATA: o_container_r   TYPE REF TO cl_gui_container.
DATA: o_tree TYPE REF TO cl_gui_simple_tree.
DATA: o_salv TYPE REF TO cl_salv_table.

DATA: it_tree_spfli TYPE STANDARD TABLE OF spfli.
DATA: it_salv_spfli TYPE STANDARD TABLE OF spfli.
DATA: it_nodes TYPE ty_it_nodes.
**********************************************************************
*
* Eventhandler
*
**********************************************************************
CLASS lcl_events DEFINITION.
  PUBLIC SECTION.
    CLASS-METHODS: on_selection_changed FOR EVENT selection_changed OF cl_gui_simple_tree
      IMPORTING
          node_key
          sender.
ENDCLASS.

CLASS lcl_events IMPLEMENTATION.
* Klick auf ein aktives Baumelement
  METHOD on_selection_changed.
    IF o_salv IS BOUND.
* Element in der Nodes-Tabelle lesen
      ASSIGN it_nodes[ node_key = node_key ] TO FIELD-SYMBOL(<fs_node>).

* iTab für SALV-Table neu aufbauen, abhängig vom gewählten Baumelement
      it_salv_spfli = VALUE #( FOR l IN it_tree_spfli WHERE ( carrid = <fs_node>-text )
                               ( mandt = l-mandt
                                 carrid = l-carrid
                                 connid = l-connid
                                 countryfr = l-countryfr
                                 cityfrom = l-cityfrom
                                 airpfrom = l-airpfrom
                                 countryto = l-countryto
                                 cityto = l-cityto
                                 airpto = l-airpto
                                 fltime = l-fltime
                                 deptime = l-deptime
                                 arrtime = l-arrtime
                                 distance = l-distance
                                 distid = l-distid
                                 fltype = l-fltype
                                 period = l-period ) ).

* SALV-Table neu anzeigen
      o_salv->refresh( ).
    ENDIF.
  ENDMETHOD.
ENDCLASS.
**********************************************************************
*
* SELECTION-SCREEN
*
**********************************************************************
* leeres Selektionsbild als Dummy für die Container-Objekte (o_splitter_main ...)
SELECTION-SCREEN BEGIN OF SCREEN 2000.
SELECTION-SCREEN END OF SCREEN 2000.
**********************************************************************
*
* INITIALIZATION
*
**********************************************************************
INITIALIZATION.
  SELECT * INTO TABLE it_tree_spfli FROM spfli.
**********************************************************************
*
* START-OF-SELECTION
*
**********************************************************************
START-OF-SELECTION.
* leeres Selektionbild 2000 anzeigen
  CALL SELECTION-SCREEN 2000.
**********************************************************************
*
* AT SELECTION-SCREEN OUTPUT
*
**********************************************************************
AT SELECTION-SCREEN OUTPUT.
* Doppelte Objekterzeugung unterbinden
  IF NOT o_splitter_main IS BOUND.
* Splitter auf default_screen (SELECTION-SCREEN 2000) erzeugen
    o_splitter_main = NEW #( parent  = cl_gui_container=>default_screen
                             rows    = 1
                             columns = 2 ).

* Breite in % (linke Spalte für den Tree)
    o_splitter_main->set_column_width( id = 1 width = 15 ).

* linken und rechten Splitcontainer holen
    o_container_l = o_splitter_main->get_container( row = 1 column = 1 ).
    o_container_r = o_splitter_main->get_container( row = 1 column = 2 ).

* Tree-Objekt erzeugen
    o_tree = NEW #( parent = o_container_l
                    node_selection_mode = cl_gui_simple_tree=>node_sel_mode_single ).

* Eventtypten müssen gesondert registriert werden
    DATA(it_events) = VALUE ty_it_events( ( eventid = cl_gui_simple_tree=>eventid_selection_changed
                                            appl_event = abap_true ) ).

    o_tree->set_registered_events( events = it_events ).

    SET HANDLER lcl_events=>on_selection_changed FOR o_tree.

* Root-Node einfügen
    it_nodes = VALUE #( ( node_key  = 'ROOT'           " Node-Bezeichner
                          relatship = cl_gui_simple_tree=>relat_last_child
                          disabled  = abap_true
                          isfolder  = abap_true        " Typ Ordner für Root-Element
                          n_image   = icon_folder      " Icon Ordner
                          exp_image = icon_open_folder " Icon geöffneter Ordner
                          style     = cl_gui_simple_tree=>style_default
                          text      = 'Airlines' ) ).

* Childs an Root-Node anhängen
    LOOP AT it_tree_spfli ASSIGNING FIELD-SYMBOL(<fs_line>).
* bei Änderung der carrid neue carrid als Child anhängen
      AT NEW carrid.
        APPEND VALUE #( node_key  = |NODE{ sy-tabix }| " Node-Bezeichner
                        relatship = cl_gui_simple_tree=>relat_last_child
                        relatkey  = 'ROOT'             " an ROOT-Element anhängen
                        style     = cl_gui_simple_tree=>style_intensified
                        text      = |{ <fs_line>-carrid }| ) TO it_nodes.
      ENDAT.
    ENDLOOP.

* Nodes im Baum einfügen
    o_tree->add_nodes( table_structure_name = 'MTREESNODE' " Typ muss gleich mit Zeilentyp von ty_it_nodes sein
                       node_table           = it_nodes ).

* Root-Nodes des Trees expandieren
    o_tree->expand_root_nodes( ).

* leeres SALV-Grid erzeugen
    cl_salv_table=>factory( EXPORTING
                              r_container    = o_container_r
                            IMPORTING
                              r_salv_table   = o_salv
                            CHANGING
                              t_table        = it_salv_spfli ).

    o_salv->get_display_settings( )->set_striped_pattern( abap_true ).
    o_salv->get_columns( )->set_optimize( abap_true ).
    o_salv->get_functions( )->set_all( ).
    o_salv->get_selections( )->set_selection_mode( if_salv_c_selection_mode=>row_column ).
    o_salv->display( ).
  ENDIF.
**********************************************************************
*
* AT SELECTION-SCREEN
*
**********************************************************************
AT SELECTION-SCREEN.
* wenn "Ausführen" (F8) geklickt wurde
  IF sy-ucomm = 'CRET'.
* Selektionbild 2000 wieder anzeigen
    CALL SELECTION-SCREEN 2000.
  ENDIF.

[ABAP] Eigene GUI-Toolbar in einem Split-Container anzeigen, Eventhandling

TYPES: ty_it_events TYPE STANDARD TABLE OF cntl_simple_event WITH DEFAULT KEY.

CLASS lcl_events DEFINITION.
  PUBLIC SECTION.
    CLASS-METHODS:
      on_function_selected FOR EVENT function_selected OF cl_gui_toolbar
        IMPORTING
            fcode
            sender.
ENDCLASS.

CLASS lcl_events IMPLEMENTATION.
* Toolbar Button geklickt
  METHOD on_function_selected.

    CASE fcode.
      WHEN 'BTN_CLOSE'.
        LEAVE PROGRAM.
      WHEN 'BTN_TEST'.
        MESSAGE 'TEST' TYPE 'I' DISPLAY LIKE 'S'.
    ENDCASE.

  ENDMETHOD.

ENDCLASS.

INITIALIZATION.

* Splitter erzeugen
  DATA(o_splitter) = NEW cl_gui_splitter_container( parent = cl_gui_container=>default_screen
                                                    no_autodef_progid_dynnr = abap_true
                                                    rows = 2
                                                    columns = 1 ).

* Absoluter Modus für Zeilenhöhe
  o_splitter->set_row_mode( mode = cl_gui_splitter_container=>mode_absolute ).

* Höhe absolut 24 Pixel für Splitter oben
  o_splitter->set_row_height( id = 1 height = 24 ).

* Splitter für oberen Container fest und verborgen
  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_movable
                            value = cl_gui_splitter_container=>false ).

  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_sashvisible
                            value = cl_gui_splitter_container=>false ).

  DATA(o_container_top) = o_splitter->get_container( row = 1 column = 1 ).
  DATA(o_container_bottom) = o_splitter->get_container( row = 2 column = 1 ).

* Toolbar hoizontal
  DATA(o_tool) = NEW cl_gui_toolbar( parent = o_container_top
                                     display_mode = cl_gui_toolbar=>m_mode_horizontal ).

* Eventtypten müssen gesondert registriert werden
  DATA(it_events) = VALUE ty_it_events( ( eventid = cl_gui_toolbar=>m_id_function_selected
                                          appl_event = abap_true ) ).

  o_tool->set_registered_events( events = it_events ).

* Toolbar-Buttons hinzufügen
* Buttontypen sind in Typgruppe CNTB definiert
  o_tool->add_button( fcode       = 'BTN_TEST'
                      icon        = icon_activate
                      butn_type   = cntb_btype_button
                      text        = 'Test'
                      quickinfo   = 'Test'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = ''
                      icon        = ''
                      butn_type   = cntb_btype_sep
                      text        = ''
                      quickinfo   = ''
                      is_checked  = abap_false
                      is_disabled = abap_false ).

  o_tool->add_button( fcode       = 'BTN_CLOSE'
                      icon        = icon_close
                      butn_type   = cntb_btype_button
                      text        = 'Schließen'
                      quickinfo   = 'Schließen'
                      is_checked  = abap_false
                      is_disabled = abap_false ).

* Eventhandler registrieren
  SET HANDLER lcl_events=>on_function_selected FOR o_tool.

* im unteren Splitter Beispieldaten anzeigen
  DATA: it_sflight TYPE STANDARD TABLE OF sflight.

  SELECT * FROM sflight INTO TABLE @it_sflight.

  DATA: o_salv TYPE REF TO cl_salv_table.

  cl_salv_table=>factory( EXPORTING
                            r_container    = o_container_bottom
                          IMPORTING
                            r_salv_table   = o_salv
                          CHANGING
                            t_table        = it_sflight ).

  o_salv->get_functions( )->set_all( ).
  o_salv->display( ).

* leere Standard-Toolbar ausblenden
  cl_abap_list_layout=>suppress_toolbar( ).

* Ausgabe von cl_gui_container=>default_screen erzwingen
  WRITE: space.

[ABAP] Splitter (cl_gui_splitter_container) fixieren und dessen absolute Höhe festlegen

INITIALIZATION.

* Splitter erzeugen
  DATA(o_splitter) = NEW cl_gui_splitter_container( parent = cl_gui_container=>default_screen
                                                    no_autodef_progid_dynnr = abap_true
                                                    rows = 2
                                                    columns = 1 ).

* Absoluter Modus für Zeilenhöhe
  o_splitter->set_row_mode( mode = cl_gui_splitter_container=>mode_absolute ).

* Höhe absolut 40 Pixel für Splitter oben
  o_splitter->set_row_height( id = 1 height = 40 ).

* Splitter für oberen Container fest und verborgen
  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_movable
                            value = cl_gui_splitter_container=>false ).

  o_splitter->set_row_sash( id = 1
                            type = cl_gui_splitter_container=>type_sashvisible
                            value = cl_gui_splitter_container=>false ).

  DATA(o_container_top) = o_splitter->get_container( row = 1 column = 1 ).
  DATA(o_container_bottom) = o_splitter->get_container( row = 2 column = 1 ).
  
  ...

* Ausgabe von cl_gui_container=>default_screen erzwingen
  WRITE: space.